Digital Voice Systems AMBE-3000 Especificações Página 84

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 111
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 83
AMBE-3000F™ Vocoder Chip Users Manual
Version 3.4, April, 2014
Dat
a and Configuration Packets
PKT_GET
CFG field (1 byte) this field will cause the AMBE-3000F™ Vocoder Chip to output a response field which
contains the 3 bytes which were read from the configuration pins after reset. Note that this does not cause the configuration
pins to be re-read, it merely reports back what the state of the pins were upon power-up or reset.
PKT_GETCFG Field – Format
Field Identifier Control Field Data
1 Byte 0 Byte
0x36 No Data Needed
Table 76 PKT_GETCFG Field
PKT_GETCFG Response Field – Format
Response Fields Data
Field Identifier CFG0 CFG1 CFG2
1 Byte 1 Byte 1 Byte 1 Byte
0x36
Table 77 PKT_GETCFG Response Field
PKT_READCFG field (1 byte total) this field will cause the AMBE-3000F™ Vocoder Chip to output a response field which
contains the 3 bytes which are read from the configuration pins after the PKT_READCFG field is received. Note that if the
signal levels on the configuration pins have changed since their reset levels, then CFG0-CFG2 reported by the response packet
will reflect that change. Note that although this packet causes the configuration pins to be re-read and sent back in a response
packet, the AMBE-3000F™ Vocoder Chip does not change its configuration as a result of receiving this packet.
PKT_READCFG Field – Format
Field Identifier Control Field Data
1 Byte 0 Byte
0x37 No Data Needed
Table 78 PKT_READCFG Field
PKT_READCFG Response field (4 bytes total) this contains the 3 bytes of data which was read from the configuration pins
after the PKT_READCFG field is received.
PKT_READCFG Response Field – Format
Response Fields Data
Field Identifier CFG0 CFG1 CFG2
1 Byte 1 Byte 1 Byte 1 Byte
0x37
Table 79 PKT_READCFG Response Field
PKT_PARITYMODE field (2 bytes total) This field can be used to enable or disable parity fields at the end of every packet.
PKT_PARITYMODE Field - Format
Field Identifier Control Field Data
1 Byte 1 Byte
0x3F mode
Table 80 PKT_PARITYMODE Field Format
(Subject to Change) Page 74
DVSI CONFIDENTIAL PROPRIETARY
Vista de página 83
1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 110 111

Comentários a estes Manuais

Sem comentários