
Net-2000™ VCU Users Manual
Version 4.0, December, 2013
Net-
2000™ VCU Control
3.2.3.2 Specify IP Address Radio Button
When selected the Net-2000™-VCU allows the operator to manually set up the Ethernet network parameters. After
new values have been entered, select the APPLY Button to reboot the Net-2000™-VCU and have the new network
settings take effect.
3.2.3.3 Reset to Defaults Button
The Network Settings “Reset to Default” button resets the Net-2000™-VCU network setting value to obtain IP
setting from a DHCP server.
Apply Button
The Apply button applies the settings that are entered in the network settings screen. When selected the Net-
2000™-VCU automatically stops and reboots to implement the new settings that were entered.
3.3 Status Control Bar
Located just under the navigation menu is the status indication. This informs the operator of the state of the Net-
2000™-VCU. The status screen displays the host name of the Net-2000™-VCU, what mode the unit is in and the
current running condition. Upon power up the Net-2000™-VCU loads the default settings and the unit is idle.
Click the Start button to begin running the VCU with the default settings. Click the Stop button to put the Net-
2000™-VCU back into the idle mode. Changes to the settings can be made while the unit is active. However, the
new settings will not take affect until the Start button is clicked.
Note: The “Start New Settings” button will automatically stop and restart the Net-2000™-VCU. It is not necessary
to click on the “Stop” button and then click the Start button to restart the Net-2000™-VCU with a new setting.
Figure 11 Net-2000™ VCU Status
3.3.1 Net-2000™- is Idle
The Net-2000™-VCU is idle when the unit is stopped. In this condition the unit is ready to process data through the
encoder or decoder when the START button is selected.
3.3.2 Net-2000™- is Active
When the Net-2000™-VCU is active the unit is The unit will return to idle when the STOP button is selected.
(Subject to Change) Page 12
DVSI CONFIDENTIAL PROPRIETARY
Comentários a estes Manuais